SilicaPro

Nano-Microporous Insulation Board

Thermal Insulation Board wholesale supplier in China

Features of Nano-Microporous Thermal Insulation Board:

As a leading enterprise in China’s high silica industry, we have a complete product series. Among them, the nano-porous thermal insulation board is the latest industrial thermal insulation product developed by our company, which mainly solves the thermal insulation demand in the high-temperature working range. The microporous thermal insulation board is widely knows as microporous silica board.

Products Characteristics:

– Contains a variety of forms, which can be divided into two categories: rigid board and flexible board
– Stable physical properties under high temperature working conditions
– Factory customized production can be carried out according to the actual use scale (with a certain amount of prerequisite)
– A variety of packaging material forms can be selected
– Some products can provide hydrophobic treatment services to meet their hydrophobic requirements
– Easy to cut and install, convenient and quick to install and use
– It does not contain any respirable fiber and has no damaging effect on the environment

 

Product Advantages

Compared with traditional heat-resistant thermal insulation materials, our nano microporous insulation board have the following advantages:
– On the premise of ensuring the same performance, the thickness and volume of the insulation material are greatly reduced
– Under the premise of ensuring the same performance, the quality of the insulation material is greatly reduced
– The use of our nano-microporous thermal insulation materials can significantly reduce the number of thermal insulation components and speed up the installation
– Due to its lightweight and small size, the cost and cost of transportation and storage are reduced
– The installation process is clean and environmentally friendly, and does not contain harmful substances

HT-1000 Microporous Thermal Insulation Panel

Product Introduction

HT-1000 is a kind of high-performance thermal insulation panel with a microporous structure based on chains of amorphous fumed silica agglomerates of particles from 7 to 12nm in size. It also contains a special opacifier for minimizing infrared radiation. This product typically has an extremely low thermal conductivity which is 3~4 times better insulating performance compared with conventional insulations). It has even lower thermal conductivity than still air in the most temperature range between 50-1000 degrees.

Product Characteristics

Appearance: Grey color panel (Core material) 

Composition: SiO2(60-80%), SiC(10-30%), others(5-10%)

Standard Size: 1200*1000 mm, 1200*500mm, 1000*600mm, 600*500mm 

Other size could be customized on request. 

Thickness: 10-50mm

Tolerance on block dimension: ±3 mm

Tolerance on thickness: ±1mm

Surface Finishing: Uncoated panel, POF/PE shrinkage film packing, aluminum foil packing, aluminum composite film packing, glass fiber clothing packing.  

Special Shape: Provide cutting, drill, and other special processing according to customer request.  

Performance

Maximum Application Temperature 1000℃
Density: Standard:~280kg/m³

Thermal conductivity

(YB/T4130-2005)

(Temperature is based on hot side)

<0.020W/Mk              @200℃
<0.026W/Mk              @400℃
<0.032W/Mk              @600℃
<0.038W/Mk              @800℃
Thermal Shrinkage

≤3.0%  (1000℃ 24h full soak) ASTM C356

≤2.0%   One side heating

 Major Advantages

→ Low thermal conductivity

   The thermal conductivity is 3-4 times lower than conventional material. It has a thermal conductivity up to 1000°C, which is close to the lowest theoretically possible in any material. It provides the application possibility of reducing the energy consumption, reducing the thickness/weight of the equipment, or providing more available equipment space. 

→ Excellent Thermal performance

   HT-1000 not only has a low thermal capacity but also is resistant to thermal shock. It is mechanically stable for long periods at maximum operating temperatures if without external force damage. 

→ Safe 

HT-1000 is made of green materials and environmentally safe with no respirable fibers. The components in this product are not considered to be hazardous under prescribed operating conditions. See product MSDS for additional information.

→ Easy to apply

   HT-1000 is simple to use and easy to apply. Special Alert: The product should not be in contact with the liquid during installation and service. 

→ Non-combustible

  HT-1000 is non-combustible and suitable for thermal insulation and fire stop. 

Application Industries

Steel (Ladle, tundish, torpedo ladles); Chemical and Petrochemical (Cracking furnace); Non-Ferrous (Melting furnaces, holding furnaces, casting ladle, launder); Cement and Mineral (Rotary kiln); Ceramics (Tunnel kiln); Glass (Melting, distribution lauder, bending oven); High-Temperature Instrument (Temperature data recorder, thermal battery); Domestic Appliance (Storage heater, radiant cooker); Aviation and Navigation (Black box, instruments); Others (Fuel cell, elevator shaft fire doors, rescue capsule)

MT-800C Microporous Thermal Insulation Panel

Product Introduction

MT-800C is a kind of high-performance thermal insulation panel with a microporous structure based on chains of amorphous fumed silica agglomerates of particles from 7 to 12nm in size. It also contains a special opacifier for minimizing infrared radiation. This product typically has an extremely low thermal conductivity which is 3~4 times better insulating performance compared with conventional insulations). It has even lower thermal conductivity than still air in most temperatures between 50-800 degrees.

Product Characteristics

Appearance: Grey color panel (Core material) 

Composition: SiO2(60-80%), SiC(10-30%), others(5-10%)

Standard Size: 1200*1000 mm, 1200*500mm, 1000*600mm, 600*500mm

Other size could be customized on request. 

Thickness: 10-50mm

Tolerance on block dimension: ±3 mm

Tolerance on thickness: ±1mm

Surface Finishing: Uncoated panel, POF shrinkage film packing, aluminum foil packing, aluminum composite film packing, glass fiber clothing packing.  

Special Shape: Provide cutting, drill, and other special processing according to customer request.  

Performance

Maximum Application Temperature 800℃
Density: Standard:~250kg/m³

Thermal conductivity

(YB/T4130-2005)

(Temperature is based on hot side)

0.023W/Mk              @200℃
0.028W/Mk              @400℃
0.033W/Mk              @600℃
0.040W/Mk              @800℃
Thermal Shrinkage

≤3%  (800℃ 24h full soak)

≤2%  (800℃ 24h one side heating)

Major Advantages

→ Low thermal conductivity

The thermal conductivity is 3-4 times lower than conventional material. Has a thermal conductivity of up to 800°C, which is close to the lowest theoretically possible in any material. It provides the application possibility of reducing the energy consumption, reducing the thickness/weight of the equipment, or providing more available equipment space. 

→ Excellent Thermal performance

MT-800C not only has a low thermal capacity but also is resistant to thermal shock. It is mechanically stable for long periods at maximum operating temperatures if without external force damage. 

→ Safe 

MT-800C is made of green materials and is environmentally safe. The components in this product are not considered to be hazardous under prescribed operating conditions. See product MSDS for additional information.

→ Easy to apply

MT-800C is simple to use and easy to apply. Special Alert: The product should not be in contact with the liquid during installation and service. 

→ Non-combustible

MT-800C is non-combustible and suitable for thermal insulation and fire stop. 

Application Industries

Chemical and Petrochemical (Cracking furnace); Non-Ferrous (Melting furnaces, holding furnaces, casting ladle, launder); Cement and Mineral (Rotary kiln); Ceramics (Tunnel kiln); Glass (Melting, distribution lauder, bending oven), High-Temperature Instrument (Temperature data recorder, thermal battery), Domestic Appliance (Storage heater, radiant cooker); Aviation and Navigation (Black box, instruments); Others (Fuel cell, elevator shaft fire doors, rescue capsule)

Phone

+8613758326701

 

Bright Sky New Material Co Ltd.

Room 1101-11, 11/F,Youbang Building. Jiaxing Headquarters Business Garden, Nanhu District, Jiaxing, Zhejiang, 314000 - China

Email

sales@silicapro.com
lucyhhyy@gmail.com

© 2021 SILICAPRO.COM
All Rights Reserved