If you purchased a fiberglass insulation board online, you would most likely have to install it yourself. Although in theory, the installation of this device is relatively easy, you may need more detailed instructions for Insulation the fiberglass on walls to work safely especially if you have not previously experienced in installing this one thermal insulation board. Following the instructions from a valid source is necessary for the thermal insulation to function optimally.
As we know, a fiberglass-based thermal insulation board can be used to control the room temperature so that it is always comfortable. By installing this device, you no longer need to use an air conditioner, fan, or room heater because the thermal insulation will dispel heat from the outside so that the air inside remains stable.
Likewise, when winter arrives. You will not be cold in the room, even if you don’t use a heater. In other words, you’ve saved significant energy when installing thermal insulation on your home or other property assets.
The Right and Safe Way to Install Insulation of Fiberglass on Walls
So how do you properly and safely install fiberglass insulation on walls? In this article, you will find information about methods for insulating walls, as well as cutting and bonding insulation. Let’s look at the following description:
1. Use Standard Security Tools
Installation of fiberglass must be done carefully. You should use standard safety devices to protect yourself from fine glass fiber debris and powder. These small objects can be inhaled so that they irritate the lungs or irritate the eyes and skin. So, you must use safety equipment in the form of head protection, goggles, and a mask or cover your mouth and nose. You should also wear gloves, long-sleeved clothing, long pants, and shoes and socks.
2. How to Cut the Fiberglass Insulation Board
The fiberglass insulation board on the walls must be adjusted and most likely cut as necessary. Always use a ruler for accurate cuts. Rulers can be made yourself from straight wood, then marked with accurate measurements (inches or centimeters). You’ll also need to mark the fiberglass so that it matches the angle of the wall. Use a utility knife or snap-off knife for a neat and smooth cut.
3. How to Insulate Fiberglass On Walls
Once you have the correct sizes of fiberglass boards, start the installation. Keep in mind that fiberglass works best because of its ability to trap air. So, when you tighten the insulation, don’t put too much pressure on it because it will reduce the insulation value. Next, unfold the tab, then flatten it around all the edges. You can use staples or inch staples about 12 inches apart and then secure them.
4. Insulation of Unsmooth Walls
It will be easier to install fiberglass on a smooth wall surface. But you will find sockets, wall switches, or other electrical boxes, and this will be a hurdle in installing fiberglass on walls. How to install it must be done with a special technique, starting from separating the insulation closest to the barrier. Next, tuck the back half of the wire and then let the front half flank the barrier. You can also cut the insulation once it’s sized to fit the barrier.
5. Handling of cracks in fiberglass insulation on walls
If there are cracks in the insulation board, you can patch it using fire-resistant putty. Make sure all cracks and holes are tightly closed to prevent air leaks through the attic or ceiling of the house. But make sure the insulation doesn’t block or block the vent. If you insulate properly, the energy-saving agenda in your home will work very effectively. Don’t hesitate to ask for professional help or read the installation instructions if you have any problems installing fiberglass on walls.
6. Where to Get High-Quality Fiberglass Insulation Board
The better the thermal insulation board you use, the easier it will be to install. So, how to distinguish a good thermal insulation board and a bad one? Maybe all companies will claim their products as the best. You may also not be able to distinguish the quality of the product with the naked eye, especially if you buy it online.
So, the easiest way to ensure the quality of a product is to buy it from a trusted supplier. You can cooperate with Bright Sky New Material Co Ltd. or Silicapro to get one of our flagship products, namely the microporous nano thermal insulation board. This is a thermal insulation board resulting from the latest technology that is an easy and minimal risk during installation.
Our company always involves a team of experts consisting of academics and practitioners. That way, all the products we sell have been tested for quality and apply the latest technology. You can work with us to procure thermal insulation boards of fiberglass on walls, a variety of fire-resistant products, as well as fiberglass raw materials that have been processed into yarn and fabric. You even have the potential to get the lowest price offer and a mutually beneficial partnership.